Contact Your Dealer

Tensioned Screens

Unleash your production capacity

Flex-Mat screen technology allows wires, bonded to lime-green polyurethane strips, to vibrate independently from hook to hook for faster material stratification.

Flex-Mat high-vibration wire screens are available in a side-tensioned or end-tensioned configuration.

D
DD
S
T
L

Flex-Mat Tensioned Series

D
  • Standard pattern
  • Square opening
  • Equivalent to square woven
  • Precise sizing

> Opening Sizes
0.059" – 4"
1.5 mm – 101.6 mm

DD
  • For high-impact and heavy-material applications as it absorbs impact better than other applications
  • Eliminates the “popcorn effect” caused by larger, single wires

> Opening Sizes
1.125" – 4"
28.6 mm – 101.6 mm

S

Used with round or cubical-shaped material, or when precise passing is not required, Flex-Mat S allows you to:

  • Maximize open area
  • Eliminate blinding
  • Reduce fines

> Opening Sizes
0.059" – 2"
1.5 mm – 50.8 mm

T
  • Ideal for openings under 0.059" or 1.5 mm
  • Replaces fine mesh to better reduce blinding

> Opening Sizes
0.020" – 2"
0.5 mm – 50.8 mm

L
  • Maximum open area for desanding and removing fines
  • Lasts longer than traditional harp/piano wire, while keeping material in spec
  • Ideal for compost and topsoil

> Customized to specific applications
Starting at 0.031"
0.8 mm

Side Seals

Side Seals

Side Seals

Optional on all end-tensioned Flex-Mat panels to prevent oversized material from passing between the screen cloth and screen box sides.

Overlaps

Overlaps

Overlaps

Highly recommended and offered as standard on tensioned Series D, T and S with openings of 3/8" or 9.5 mm or less.

Optional on panels with larger openings up to 2" or 50.8 mm.

Crown Deck

Crown deck

Crown Deck

Crown adapters are necessary in order to achieve the optimal crowned deck for your screen if the screen box was initially fitted with panels.

The adapters can be installed on flat decks that were originally designed to use modular synthetic screens or punch plates.