Contact Your Dealer

MAJOR’s WOVEN SCREENS are the longest-lasting woven wire screens available.

To maximize your profits and throughput for faster material stratification, consider changing to Flex-Max high-vibration screens, which also eliminates blinding, pegging and clogging issues.

technology

Technical document

The WOVEN SCREENS are manufactured with an industry-leading stringent wire opening of ±3% and extremely tight crimps and weave for a longer wear life and the elimination of premature failure.

Made with either our OPTIMUMWIRE technology or stainless steel wire, our WOVEN SCREENS outlast those of the competition.

Square
Double-Weave
Slotted
HyperSlot

Series

Square

  • For general applications
  • Provides precise passing

> Opening Sizes
0.093" – 6"
2.36 mm – 152.4 mm

Double-Weave

  • Square type for heavier applications (withstands up to 4 times more impact force than heavier single-strand woven screens)
  • Provides precise passing
  • Ideal for scalping and top-deck applications (provides up to 50% more throughput than perforated punch plates at a lower cost)

> Opening Sizes
1.125" – 4"
31.75 mm – 127.0 mm

Slotted

  • Single or triple shute
  • Removes fines
  • Provides more open area than square openings
  • Use with round or cubical-shaped material or when precise passing is not required

Customized to specific applications

HyperSlot

  • Produces vibration to reduce blinding.
  • Tumbling effect for better fines removal.
  • Slows material down to provide more time for material to pass over the openings.

Customized to specific applications

Side Seals

Side Seals

Side Seals

Recommended to prevent oversized material from passing between the screen cloth and screen box sides.

Overlaps

Overlaps

Overlaps

Used to prevent product contamination on screens with openings of ⅜” (9.5 mm) or smaller when there are no cross-members at the junction point.

Overlaps on screens with wires of more than 0.192” (4.80 mm) in diameter can cause installation problems and breakage.
For larger-diameter wire screens, when there are no cross-members at a junction point, it is recommended to use FLEX-MAT screens with an overlap.