Comuníquese con su Distribuidor

Las mallas de alambre tejido OptimumWire de MAJOR son las de mayor duración del mercado.

Para maximizar sus ganancias y la producción mediante una estratificación más rápida del material, considere el cambio por las mallas de alta vibración FLEX-MAT que, además, eliminan los problemas de obstrucción, taponamiento y atascamiento.

technology

Están fabricadas con una apertura entre alambres muy estricta (±3% de tolerancia), líder en la industria, y pliegues y tejido extremadamente apretados para asegurar una vida útil más prolongada y eliminar las fallas prematuras.

Fabricadas con nuestra tecnología OptimumWire o con alambre de acero inoxidable, nuestras mallas tejidas duran más que las de la competencia.

SQUARE
DOUBLE WEAVE
SLOTTED
HYPERSLOT

SQUARE

Used to prevent product contamination on screens with openings of 9.5 mm or smaller when there are no cross-members at the junction point.

Overlaps on screens with wires of more than 4.80 mm in diameter can cause installation problems and breakage.

For larger-diameter wire screens, when there are no cross-members at a junction point, it is recommended to use FLEX-MAT screens with an overlap.

 

Opening sizes: 2 – 120 mm

DOUBLE WEAVE

Used to prevent product contamination on screens with openings of 9.5 mm or smaller when there are no cross-members at the junction point.

Overlaps on screens with wires of more than 4.80 mm in diameter can cause installation problems and breakage.

For larger-diameter wire screens, when there are no cross-members at a junction point, it is recommended to use FLEX-MAT screens with an overlap.

 

Opening sizes: 2 – 120 mm

SLOTTED

Used to prevent product contamination on screens with openings of 9.5 mm or smaller when there are no cross-members at the junction point.

Overlaps on screens with wires of more than 4.80 mm in diameter can cause installation problems and breakage.

For larger-diameter wire screens, when there are no cross-members at a junction point, it is recommended to use FLEX-MAT screens with an overlap.

 

Opening sizes: 2 – 120 mm

HYPERSLOT

Used to prevent product contamination on screens with openings of 9.5 mm or smaller when there are no cross-members at the junction point.

Overlaps on screens with wires of more than 4.80 mm in diameter can cause installation problems and breakage.

For larger-diameter wire screens, when there are no cross-members at a junction point, it is recommended to use FLEX-MAT screens with an overlap.

 

Opening sizes: 2 – 120 mm

OVERLAPS

OVERLAPS

OVERLAPS

Highly recommended and offered as standard on tensioned Series D, T and S with openings of 3/8” or 9.5 mm or less.

Optional on panels with larger openings up to 2” or 50.8 mm.