![logo flexmat logo flexmat](https://www.majorflexmat.com/wp-content/uploads/2024/02/logo-flexmat-tensionned@2x.webp)
UNLEASH YOUR PRODUCTION CAPACITY
FLEX-MAT screen technology allows wires, bonded to lime-green polyurethane strips, to vibrate independently from hook to hook for faster material stratification.
FLEX-MAT high-vibration wire screens are available in a side-tensioned or end-tensioned configuration.
TENSIONED SERIES
![flexmat d serie FlexMat D-Serie](https://www.majorflexmat.com/wp-content/uploads/2023/11/flexmat-d-serie.webp)
D SerieS
- Standard pattern
- Replaces to square woven
- Precise sizing
Opening Sizes
0.059″ – 4″
1.5 mm – 101.6 mm
![FMT DD FMT DD](https://www.majorflexmat.com/wp-content/uploads/2024/03/FMT_DD.webp)
DD serieS
- For high-impact and heavy-material applications as it absorbs impact better than other applications
- Eliminates the “popcorn effect” caused by larger, single wires
Opening Sizes
1.123″ – 4″
28.6 mm – 101.6 mm
![flexmat s serie flexmat s serie](https://www.majorflexmat.com/wp-content/uploads/2024/02/flexmat-s-serie.webp)
S serieS
Used with round or cubical-shaped material, or when precise passing is not required, FLEX-MATS allows you to:
- Maximize open area
- Eliminate blinding
- Reduce fines
Opening Sizes
0.059″ – 2″
1.5 mm – 50.8 mm
![flexmat t serie flexmat t serie](https://www.majorflexmat.com/wp-content/uploads/2024/02/flexmat-t-serie.webp)
T serieS
- Ideal for openings under 0.059″
or 1.5 mm - Replaces fine mesh to better
reduce blinding
Opening Sizes
0.020″ – 2″
0.5 mm – 50.8 mm
![flexmat l serie flexmat l serie](https://www.majorflexmat.com/wp-content/uploads/2024/02/flexmat-l-serie.webp)
L serieS
- Maximum open area for
desanding and removing fines - Lasts longer than traditional
harp/piano wire, while keeping
material in spec - Ideal for compost and topsoil
Opening Sizes
Starting at 0.031″
0.8 mm
SIDE sEALS
Optional on all end-tensioned FLEX-MAT panels to prevent oversized material from passing between the screen cloth and screen box sides.
![side seals FMT side seals FMT](https://www.majorflexmat.com/wp-content/uploads/2023/11/side_seals_FMT.webp)
![overlaps FMT Overlaps Flex-Mat](https://www.majorflexmat.com/wp-content/uploads/2023/11/overlaps_FMT.webp)
OVERLAPS
Highly recommended and offered as standard on tensioned Series D, T and S with openings of 3/8″ or 9.5 mm or less. Optional on panels with larger openings up to 2″ or 50.8 mm.
Crown Deck
The adapters are necessary in order to achieve the optimal crowned deck for your screen if the screen box was initially fitted with panels. The adapters can also be installed on flat decks that were originally designed to use with modular synthetic screens or punch plates.
![FMT Crown deck adapter Crown Deck Flex-Mat](https://www.majorflexmat.com/wp-content/uploads/2023/11/FMT_Crown_deck_adapter.webp)
Flex-Mat delivers value and benefits on all three decks
1. Higher screening efficiency
by providing more throughput and eliminating near-size pegging on top decks.
2. PRODUCES A CLEANER RETAINED PRODUCT
through middle decks, while often reducing or eliminating the need for washing.
3. PREVENTS FINE MATERIAL BLINDING
on bottom decks.
![graphique page21 graphique page21](https://www.majorflexmat.com/wp-content/uploads/2024/02/graphique-page21.webp)